SOLVING TIGHT AND HIGH CHALLENGES WITH A VERTICAL MAST LIFT

Posted by

Construction, maintenance, and facility enhancements offer complex needs, especially when they occur in areas that are already in use. Current infrastructure can block access to a needed area. Equipment use of varied sorts can cause task execution headaches. And the people in high traffic environments challenge operators to move carefully to remain productive while remaining unobtrusive, allowing people to use those spaces with little interruption. A vertical mast lift offers one answer to help meet each of these challenges.

What is a Vertical Mast Lift?

Vertical mast lifts are a type of aerial work platform intended to provide access to high reaching tasks while allowing for tight fitting access and a small space footprint. While similar to scissor lifts, vertical mast lifts utilize a multi-stage mast that accommodates a smaller footprint than traditional personnel lifts like scissor lifts. They come equipped with platform extensions that extend beyond the base of the vehicle.

Navigating Existing Infrastructure with a Vertical Mast Lift

Facility designers often pay close attention to the long term maintenance needs of the operation. Sometimes those designers consider what equipment can be used to fulfill those needs. But over the lifetime of any evolving work environment, unexpected infrastructure changes arise – as do unexpected maintenance needs.

A vertical mast lift can help meet high reaching maintenance needs when original or new facility infrastructure can be difficult to navigate. With a width of only 30 inches and a length of four and a half feet, the AICHI Vertical Mast Lift can fit through standard doorways, in between tight racking, or in other spaces obstructed by infrastructure. Have a need to fit between ducts for heating and cooling work or pipes to fix facility plumbing? The platform dimensions of a vertical mast lift are built to access these spaces. And with many models like the AICHI Vertical Mast Lift equipped with zero-degree turn radius, versatility in maneuvering is optimal for tight locations. Has a new rack appeared directly beneath an electrical box you need to access? Position an AICHI Vertical Mast Lift next to the rack and use its 15-inch platform extension to reach over the rack and get to the task.

Integrating Vertical Mast Lifts with Other Equipment

Smart operations managers and construction project managers plan routing of their equipment carefully to make the most use of the space and assist operators in maintaining efficient operation. When maintenance needs arise in areas with high traffic from other equipment, a vertical mast lift’s small footprint can help optimize space. By working close to exterior walls of a facility or on the outside perimeter on a construction site and taking up little space, other industrial equipment can maintain optimal operation and efficiency.

Using Vertical Mast Lifts in Public Places

Maintenance in and around buildings that grant public access is a common need. While proper precautions need to be exercised when performing maintenance around non-facility personnel/operators, vertical mast lifts come equipped with features to assist in the protection of both the operator and passersby. The AICHI Vertical Mast Lift features systems like anti-rollback and lift interlock when a steep grade is detected. Standard pothole protectors and reduced travel speed when elevated also enhance the protection provided to the operators when working at height.

Vertical mast lifts are versatile and offer an excellent solution for accessing difficult to reach areas for maintenance. While they do provide a flexible solution, key considerations such as platform height need and weight requirements must be considered. As these requirements increase, consider investing instead in an AICHI Scissor Lift for increase height and weight capacity with a slightly larger physical footprint.

Article Courtesy of: Mark Faiman

Product Planning Manager, Toyota Material Handling

×
×